Automount (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Zeile 173: Zeile 173:
 
</div>
 
</div>
  
==== Beispiel NFS Mount ====
+
==== Example NFS mount ====
Beispiel eines nfs Mounts.<br/>
+
Example of a nfs mount. <br/>
Die Angaben müssen ihr natürlich den Gegebenheiten anpassen.
+
The settings need to be changed according to your situation.
  
 
  video -fstype=nfs,rw,soft,tcp,nolock,rsize=8192,wsize=8192 192.168.1.15:/video
 
  video -fstype=nfs,rw,soft,tcp,nolock,rsize=8192,wsize=8192 192.168.1.15:/video

Version vom 1. Oktober 2013, 20:41 Uhr

Deutsch.png - in Deutsch English.png - in English

The Automounter is a service (consisting of automount/autofs), to mount file systems automatically. Mounting is performaed when accessing the configured directories. Unmounting is performed by default after 5 sec. of inactivity (depending on the used image). On dreamboxes the service is used to access network shares. The shares can be accessed over cifs and/or nfs.

After mounting the share it's possible to play supported movies, music and images. The network shares can be on Dreamboxes, Linuxr computers, Macs, NAS and Windows computers.

Advantage of the automounter: no scripts, editing of the fstab or boot settings are required.

Functionality Automounter

For the preamble Automount Mounter, two files are important, autofs and automount. Autofs defines the mount points using the auto.master file. Afterwards the mounting is performed by automount.

Goal of the article

  • Learn the configuration of the Auto Mounter

Prerequisites

  • Knowing the BluePanel (Automount - Editor) and the remote control
  • Editing the configuration file with an unix compatible editor

Configuring the Automounter

There are 3 ways to configure the automounter.

Configuration via Automount Editor

The Automount Editor is available in Enigma since Gemini Project 1.9 and in Enigma2 since Gemini Project 3.2 in the BluePanel.

  • With Enigma (since version 4.5) the Automount-Editor can be found in the BluePanel under Extras / Settings => Automount
  • With Enigma2 (since version 4.1) under Settings => Automount Editor
  • With the installed GP3 Plugin under BluePanel => Settings => Automount Editor
Ambox notice.png After configuring the mount point, the box or the autofs Daemon needs to be restarted. When using the Automount Editor of the GP3 Plugin, this is no longer required. After closing the editor, autofs is restarted automatically.

Example CIFS Mount

Example of a cifs mount.
The settings need to be changed according to your situation.

Automount Editor GP3 Plugin
Automount Editor GP2
Automount Editor GP
description of the settings

Name
Enter the name of the device (e.g. sound). The autofs daemon creates a directory with the selected name.
The path of the directory is saved in the file auto.master.
Read: Accessing the mount point.

Attention: if using multiple mounts, the name (mount point) should always be different.

Typ
selection of the protocol CIFS.

Parameter
Options for the mount.

Server
IP address of the source device.

Share
Enter the name of the shared directory.
Attention, with Enigma2 there schouldn't be a / (Slash) entered at the beginning!

read / write buffer
The options rsize and wsize define the size of the data packages, which are exchanged by the client and server.

User
Enter the user name of for the access on the source device.

Password
Enter the password for the access on the spurce device.

Charset (utf8)
Sets the character encoding onto utf8, useful for special characters.

Example NFS Mount

Example of a nfs mount.
The settings need to be changed according to your situation.

Automount Editor GP3 Plugin
Automount Editor GP2
Automount Editor GP
description of the settings

Name
Enter the name of the device (e.g. sound). The autofs daemon creates a directory with the selected name.
The path of the directory is saved in the file auto.master.
Read: Accessing the mount point.

Attention: if using multiple mounts, the name (mount point) should always be different.

Typ
selection of the protocol NFS.

Parameter
Options for the mount.

Server
IP address of the source device.

Share
Enter the name of the shared directory.
Attention, with Enigma2 there schouldn't be a / (Slash) entered at the beginning!

read / write buffer
The options rsize and wsize define the size of the data packages, which are exchanged by the client and server.

Accessing the mount point

The access of the created mount point depends on the Gemini version. The easiest way is to use the File Mode (Enigma), or the File Manager (Enigma2).

  • For Enigma boxes the mount point can be found in the directory /automount.
  • For Enigma2 up to GP version 3.8 the mount point is in /automount. From version 3.9 till 4.1 it can be found in /autofs. And from 4.2 upwards in /media/net.

Configuration via configuration file

The configuration file of the automounter for CVS Boxes can be found in /var/etc and for OE Boxes in /etc (CVS/OE Boxes see here). Here you can find also the different fiels depending on the image version. The syntax remained the same.

  • With Enigma the file name is automount.conf. The configuration is possible since Gemini Project 3.1.
  • With Enigma2 the file name is automount.conf for Gemini Project 1.8 - 3.8. Since version 3.9 - 4.1 the file name is auto.hotplug. And from version 4.2 upwards the name is auto.network.
Ambox notice.png The permissions with OE 2.0 images should be 644. The file shouldn't be executable! You can change the permission with the command chmod 644 /etc/auto.network.
Ambox notice.png After the creation of a mount point, the Box or the autofs daemon should be restarted.

Example CIFS mount

Example of a cifs mount.
The settings need to be changed according to your situation.

sound -fstype=cifs,rw,soft,rsize=8192,wsize=8192,iocharset=utf8,user=Benutzername,pass=Passwort ://192.168.1.10/sound
Beschreibung der Angaben

sound
Namen des Zielgerätes (z.B. sound) eingeben. Der autofs Dienst legt automatisch ein Verzeichnis mit dem Mountpunktnamen an.
Der Pfad zu dem Verzeichnis ist in der Datei auto.master definiert.
Lest dazu den Abschnitt Zugriff auf den Mountpunkt.

Achtung: Werden mehrere Mounts auf Freigaben eingerichtet, dann muss der Mountpunktname immer unterschiedlich sein.

-fstype=
Auswahl des Protokolls CIFS.

rw,soft
Optionen für den mount. Weitere Informationen finden sich hier.

user=Benutzername
Eingabe des Benutzernamens für den Zugriff auf das Zielgerät.

pass=Passwort
Eingabe des Passwortes für den Zugriff auf das Zielgerät.

rsize=8192,wsize=8192
Die Optionen rsize und wsize bestimmen die Grösse der Datenpakete, welche Client und Server austauschen.

iocharset=utf8
Setzt die Zeichenkodierung auf utf8, hilfreich bei Problemen mit Umlauten.

://192.168.1.10
IP Adresse des Zielgerätes eingeben.

/sound
Name des freigegebenen Ordners eintragen.

Example NFS mount

Example of a nfs mount.
The settings need to be changed according to your situation.

video -fstype=nfs,rw,soft,tcp,nolock,rsize=8192,wsize=8192 192.168.1.15:/video
Beschreibung der Angaben

video
Namen des Zielgerätes (z.B. video) eingeben. Der autofs Dienst legt automatisch ein Verzeichnis mit dem Mountpunktnamen an.
Der Pfad zu dem Verzeichnis ist in der Datei auto.master definiert.
Lest dazu den Abschnitt Zugriff auf den Mountpunkt.

Achtung: Werden mehrere Mounts auf Freigaben eingerichtet, dann muss der Mountpunktname immer unterschiedlich sein.

-fstype=
Auswahl des Protokolls NFS.

rw,soft,tcp,nolock
Optionen für den mount.

rsize=8192,wsize=8192
Die Optionen rsize und wsize bestimmen die Grösse der Datenpakete, welche Client und Server austauschen. Die Angaben sind je nach Gerät verschieden. Falsche Angaben verlangsamen den Zugriff!

192.168.1.15:
IP Adresse des Zielgerätes eingeben.

/video
Pfad der Freigabe eintragen.

Zugriff auf den Mountpunkt

Der Zugriff auf den erstellten Mountpunkt ist abhängig von der Gemini Version. Nehmt am einfachsten den Datei Modus (Enigma), oder den Datei Manager (Enigma2). Ihr könnt auch die Kommandozeile nehmen, für den Zugriff.

  • Bei Enigma Boxen ist der Mountpunkt im Verzeichnis /automount zu finden.
  • Bei Enigma2 bis GP Version 3.8 ist der Mountpunkt in /automount. Von Version 3.9 bis 4.1 ist der Mountpunkt in /autofs. Und ab Version 4.2 sind die Mountpunkte in /media/net.

Interessante Shell Befehle für den Automounter

Ambox notice.png Unter Enigma bietet der Automounter die Optionen {start|stop|restart}. Das Script heisst autofs_script.sh

Beispiele einer Enigma2 basierenden Dreambox

Stoppen von autofs

/etc/init.d/autofs stop

Starten von autofs

/etc/init.d/autofs start

Neustarten von autofs

/etc/init.d/autofs restart

Änderungen einlesen der Konfigurationsdatei

/etc/init.d/autofs reload

Status Abfrage

/etc/init.d/autofs status