Differences from DM800 HD PVR to Cloneboxes
|- in deutsch||- in english|
Here you find details of the differences between a CloneBox 800 an the original DreamBox 800. The differences can deviate depending upon the CloneBox manufacturer or/and DMM can also change some components or something. If you have doubts whether your DreamBox is an original of DMM or if you surely have a CloneBox, then contact: firstname.lastname@example.org
- Thanx to koepi for posting the pictures in the forum.
- Thanx to ATR for the pictures of the newer Clone Box.
- Thanx an DrFurunkel for new infos and pictures of the DVB-C Clone Forum
Here a list of the known differences between an original DM800 DH PVR and a plagiarism.
Surface of the Housing
Power Supply Unit
The original Power Supply Unit of a DM 800 should look this way.
This is a Power Supply Unit from Clone Boxes
The modem of a DM 800 is covered with a not leading foil and on the back of the modem are components (IC, resistor …) to be seen.
At the modem of a Clone 800 is missing the foil as well as the components.
Dreambox Security SIM Card
The DM 800 have no CPU heat sink or a CPU fan.
The Cloneboxes have a CPU heat sink or a CPU fan.
Label on mainboard
This DM 800 Mainboard are labelet with 800 REV: and the 14 pin connector is right of the sata connector.
On this Clone Box Mainboard is a label with DM800 REV: and the 14 pin connector is left of the sata connector.
Zurück zum Inhaltsverzeichnis:
From July 2008 until June 2009, a Security Hologram was attached on the packing as well as on the rear side of the unit. Newer boxes again ship without this hologram.
Instead, in the future a plugin shall be available, calculating a verification number that can be entered and checked on Dream Multimedia's website.