EParted (en)

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Deutsch.png - in Deutsch English.png - in English
eParted in action

eParted (abbreviation for Enigma Parted) is an Enigma2 Plugin for the partitioning program parted. The Plugin can create up to four partitions on different types of devices (e.g. HDD, SSD, SD, CF, USB). The partitions can be initialized with following file systems:


At this moment the Plugin supports following languages. All help with translations is appreciated.

  • English
  • german
  • Italian
  • French
  • Dutch
Ambox attention.png Attention!
(Wrong) manipulation of existing partitions result in data loss. Make a back up before using eParted.

Requirements / Good to know

  • An Image (en) based on OE 1.6 or OE 2.0 (en).
  • The package parted must available be in the Image or on the Feed.
  • For XFS, the package xfsprogs-mkfs must be installed.
  • For FAT16 the package dosfstools must be installed.
  • If an error appears when deleting a partition, this is almost 100% due to the fact the partion can not be unmounted. Also make sure you are not accessing the device e.g. over Telnet (en), FTP, or Samba.
  • The input for the partition size (Megabyte or Gigabyte) depends on the size of the device. MB is used for devices up to 8GB. For 16GB or larger the partitions are defined in GB.

Installation

Manuell

Kopiert das eparted ipk via ftp in das /tmp Verzeichnis und installiert es mit folgendem Befehl:

opkg install /tmp/eparted*

Nach einem Enigma2 Neustart findet ihr das Plugin unter MenüErweiterungen.

Via Software-Feed

Wenn das Plugin auf einem Softwarefeed liegt (z.B. GP3), kann es einfach über die Softwareverwaltung, oder die Addons installiert werden. Via Telnet wäre der Befehl wie folgt:

opkg update && opkg install eparted

Nach einem Enigma2 Neustart findet ihr das Plugin unter MenüErweiterungen.


Bedienung

Partitionen löschen

Partitionen löschen
  1. eParted starten.
  2. Das zu partitionierende Speichergerät auswählen.
  3. Die zu löschende(n) Partition(en) anwählen und mit der roten Taste löschen.
  4. Mit der blauen Taste die Löschung der Partition(en) ausführen.


Partitionen erstellen

Partitionen erstellen
  1. eParted starten.
  2. Das zu partitionierende Speichergerät auswählen.
  3. Neue Partition mit der grünen Taste hinzufügen.
  4. Grösse der Partition eingeben.
  5. Gewünschtes Dateisystem auswählen.
  6. Eingaben mit mit grünen Taste bestätigen.
  7. Partitionierung und Formatierung mit der blauen Taste starten.


Supportthread

Braucht ihr Hilfe zum eParted, dann folgt bitte folgendem Link ;)

eParted