GP3 Device manager (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
 
(Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt)
Zeile 32: Zeile 32:
 
*'''Standby''' - Switches the HDD in standby immediately
 
*'''Standby''' - Switches the HDD in standby immediately
  
* '''[[GP3 Device manager (en))#Test menu|Test]]''' - are opened with the blue button
+
*'''[[GP3_Device_manager_(en)#Test_menu|Test]]''' - are opened with the blue button
  
 
*'''[[GP3 Device manager (en)#HDD Temperature|HDD Temperature]]''' - can be found here.
 
*'''[[GP3 Device manager (en)#HDD Temperature|HDD Temperature]]''' - can be found here.

Aktuelle Version vom 27. November 2012, 12:52 Uhr

Deutsch.png - in Deutsch English.png - in English

Device Manager

Geraete-Einstellungen-Enigma2.png
  • Unmount - With the red button you can unmount the device from the system
  • Initialise - Format the hard disk with the green button (ATTENTION ALL DATA WILL BE ERASED!!)
  • Settings - are opened with the blue button
  • Informations - The device informations are opened with the OK button



Informations

Geraete-INFO-Enigma2.png
  • Standby - Switches the HDD in standby immediately
  • Test - are opened with the blue button

Test menu

Geraete-test-Enigma2.png
  • Speed - Measure the speed of the HDD/USB Stick
  • Check File System - Check the file system and fix errors



Settings/Parameters

Geraete-menue-Enigma2.png
Hard disks:
Hard Disk Standby after - Hard Disk goes into standby after the specified time
Geraete-menue-CD-Enigma2.png
DVD player:
speed - the higher the value, the quiter the DVD device plays



HDD Temperature

If the hard disk is not recognized, read here: Hddtemp.db



HDD Speed

Geraete-speedtest-Enigma2.png



Initialise (Format)

Before formating the hard disk needs to be "unmounted".
Formating the hard dsik will erase all data on the disk!