Image update - Dreambox 500: Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
 
(Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt)
Zeile 1: Zeile 1:
[[Kategorie:Index]]
 
[[Kategorie:FAQ and instructions]]
 
[[Kategorie:Basis knowledge]]
 
 
{|width="40%"
 
{|width="40%"
 
  |[[Bild:deutsch.png]] - [[Image aufspielen - Dreambox 500|in deutsch]]
 
  |[[Bild:deutsch.png]] - [[Image aufspielen - Dreambox 500|in deutsch]]
 
  |[[Bild:english.png]] - [[Image update - Dreambox 500|in english]]
 
  |[[Bild:english.png]] - [[Image update - Dreambox 500|in english]]
 
  |}
 
  |}
{|width=99%
 
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 1em 1em 1em;  background-color:#F8F8FF; align:right;">[[Bild:Artikel_Hinweis.png|right|40px|The Gemini Project]]
 
= Installation to Flash =
 
</div>
 
|-
 
|
 
<div style="background-color: #FFFAFA; border: 1px padding: .4em; solid #cccccc;">
 
__TOC__
 
 
== Installation with DMM-Software (Serial cable) ==
 
== Installation with DMM-Software (Serial cable) ==
 
 
You need:
 
You need:
 
+
* a serial cable RS 232
- a serial cable RS 232
+
* a recent Gemini-Image (to be found at the Database)
 
+
* the updatesoftware DreamUp (NOT DreamUpLan!)
- a recent Gemini-Image (to be found at the Database)
 
 
 
- the updatesoftware DreamUp (NOT DreamUpLan!)
 
 
 
 
 
 
Further instructions and the software can be found [http://www.dream-multimedia-tv.de/dm500/ here.]
 
Further instructions and the software can be found [http://www.dream-multimedia-tv.de/dm500/ here.]
  
 
== VSFA only to use with DM500PLUS==
 
== VSFA only to use with DM500PLUS==
 
 
'''VSFA means Very Simple Flashing Assistant'''
 
'''VSFA means Very Simple Flashing Assistant'''
 
+
You need: Box is connected with a DHCP-server or box has a fix IP trough Bios. For Windows XP .netFramework 2.0 will be needed
You need:  
+
Further instructions and the programm can be found [http://www.i-have-a-dreambox.com/wbb2/thread.php?threadid=72826 here.]
 
 
Box is connected with a DHCP-server or box has a fix IP trough Bios.
 
 
 
For Windows XP .netFramework 2.0 will be needed
 
 
 
 
 
Further istructions and the programm can be found [http://www.i-have-a-dreambox.com/wbb2/thread.php?threadid=72826 here.]
 
  
 
== Installation with Flashwizzard ==
 
== Installation with Flashwizzard ==
 
 
 
You need:
 
You need:
 
+
* a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
- a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
+
* a recent Gemini-image (to be found at the Database)
 
+
* the software Flashwizzard (to be found at the Database)
- a recent Gemini-image (to be found at the Database)
 
 
 
- the software Flashwizzard (to be found at the Database)
 
 
 
 
(Attention: Don't use with Maxvar Images )
 
(Attention: Don't use with Maxvar Images )
  
 
== Installation with DCC (root.cramfs) ==
 
== Installation with DCC (root.cramfs) ==
 
 
 
You need:
 
You need:
 
+
* a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
- a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
+
* a recent Gemini-image (to be found at the Database)
 
+
* the software DCC (to be found at the Database)
- a recent Gemini-image (to be found at the Database)
 
 
 
- the software DCC (to be found at the Database)
 
 
 
 
(Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP)
 
(Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP)
  
 
== Manual method ==
 
== Manual method ==
 
+
Rename the "blabla.img" to "root.cramfs and copy via FTP to /tmp. Then start update manually via settings menu. (Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP
Rename the "blabla.img" to "root.cramfs and copy via FTP to /tmp. Then start update manually via settings menu.
 
 
 
(Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP
 
  
 
== EXPERT Methode ==
 
== EXPERT Methode ==
 
 
ATTENTION: One typo could destroy your box. So please, only use this method, if you know, what you are doing.
 
ATTENTION: One typo could destroy your box. So please, only use this method, if you know, what you are doing.
 
 
Copy a complete image (consisting of rootfs and squashfs) to /tmp. Connect via telnet to the box and use the following commmand:
 
Copy a complete image (consisting of rootfs and squashfs) to /tmp. Connect via telnet to the box and use the following commmand:
  
 
cat /tmp/NameDeinesImages.img > /dev/mtd/3 <ENTER>
 
cat /tmp/NameDeinesImages.img > /dev/mtd/3 <ENTER>
  
When prompt reappears, you can use the command "reboot" and the box is starting with the new image. Don't forget the flash erase
+
When prompt reappears, you can use the command "reboot" and the box is starting with the new image. Don't forget the flash erase. Wait until the update process is finished, else your box is a paperweight
 
 
Wait until the update process is finished, else your box is a paperweight
 
  
 
Everything on your own risk!!
 
Everything on your own risk!!
  
= Installation on external memory devices =
+
== Installation on external memory devices ==
 
 
 
There is the possibility to install the image on a mounted HDD.
 
There is the possibility to install the image on a mounted HDD.
  
</div>
+
[[Kategorie:Instructions (en)]]
|}
 
----
 
Back to overview
 
[[Installation_of_Gemini-Image]] or [[Mainpage]]
 

Aktuelle Version vom 8. Juni 2013, 20:05 Uhr

Deutsch.png - in deutsch English.png - in english

Installation with DMM-Software (Serial cable)

You need:

  • a serial cable RS 232
  • a recent Gemini-Image (to be found at the Database)
  • the updatesoftware DreamUp (NOT DreamUpLan!)

Further instructions and the software can be found here.

VSFA only to use with DM500PLUS

VSFA means Very Simple Flashing Assistant You need: Box is connected with a DHCP-server or box has a fix IP trough Bios. For Windows XP .netFramework 2.0 will be needed Further instructions and the programm can be found here.

Installation with Flashwizzard

You need:

  • a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
  • a recent Gemini-image (to be found at the Database)
  • the software Flashwizzard (to be found at the Database)

(Attention: Don't use with Maxvar Images )

Installation with DCC (root.cramfs)

You need:

  • a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)
  • a recent Gemini-image (to be found at the Database)
  • the software DCC (to be found at the Database)

(Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP)

Manual method

Rename the "blabla.img" to "root.cramfs and copy via FTP to /tmp. Then start update manually via settings menu. (Attention: When MaxVar-Image will be installed, a MaxVar-Image must already be installd on the box. If you want to install "Gemini MaxVar" when original image was installed, you have to use DREAMUP

EXPERT Methode

ATTENTION: One typo could destroy your box. So please, only use this method, if you know, what you are doing. Copy a complete image (consisting of rootfs and squashfs) to /tmp. Connect via telnet to the box and use the following commmand:

cat /tmp/NameDeinesImages.img > /dev/mtd/3 <ENTER>

When prompt reappears, you can use the command "reboot" and the box is starting with the new image. Don't forget the flash erase. Wait until the update process is finished, else your box is a paperweight

Everything on your own risk!!

Installation on external memory devices

There is the possibility to install the image on a mounted HDD.