Image update - Dreambox 7020(i)

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Deutsch.png - in Deutsch English.png - in English
The Gemini Project

Installation to Flash

Installation with DMM-Software (Serial cable)

You need:

- a serial cable RS 232

- a recent Gemini-Image (to be found at the Database)

- the updatesoftware DreamUp (NOT DreamUpLan!)


Further instructions and the software can be found here.

Installation with Flashwizzard

You need:

- a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)

- a recent Gemini-image (to be found at the Database)

- the software Flashwizzard (to be found at the Database)

As soon as you have the required software, connect the Dreabox with your PC and start Flashwizzard. Then click on the icon "configuration and utilities" and ensure that your network settings are proper. Then click on the icon "Install firmware to flash", then click on the folder icon and select your image, you want to install. Then you will be asked for the last time, whether you would like to instal the image. Click yes and the update will be startet. You will also receive a status notification on your TV-screen.

Installation with DCC (root.cramfs)

You need:

- a LAN-Cable (possibly a Cross-over-cable für eine PC-Dreambox Direktverbindung)

- a recent Gemini-image (to be found at the Database)

- the software DCC (to be found at the Database)

Manual method

Rename the "blabla.img" to "root.cramfs and copy via FTP to /tmp. Then start update manually via settings menu.

Installation on external media

To install an image on an USB-stick or a CF-card you can use differnt programs.

But the image, which is used in flash should be quite recent (CVS-image recommended).

Thats because the drives of the image installed in flash will be used and should be mostly the same as used in the Gemini image to be installed on external media.



Back to overview Installation_of_Gemini-Image or Mainpage