Manual installation of drivers: Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Zeile 27: Zeile 27:
 
{{Hinweis|It's also possible to install the files via [[Telnet (en)|Telnet]]. Use the command '''cd /tmp''' to access the directory, and with '''install [[IPKG (en)|ipkg]] ********.ipk''' the installation is started}}
 
{{Hinweis|It's also possible to install the files via [[Telnet (en)|Telnet]]. Use the command '''cd /tmp''' to access the directory, and with '''install [[IPKG (en)|ipkg]] ********.ipk''' the installation is started}}
  
== Dependencies=Abhängigkeiten ==
+
== Dependencies ==
{{Hinweis|Da wir ja nun schon wissen das auch die Dreambox eine Paketverwaltung hat, kann es vorkommen das bei der Installation gewisse '''Dependencies/Abhängigkeiten''' erfüllt sein müssen.Welche Abhängigkeit wird mit den Zeichen für '''<''' bedeutet '''kleiner''', mit dem Zeichen '''>''' bedeutet '''grösser''' und mit dem Zeichen '''<nowiki>=</nowiki>''' bedeutet '''ist gleich''' signalisiert,und bezieht sich auf die Dateiversion}}
+
{{Hinweis|As mentioned before, the dreambox has a package management system.  Therefor it might occur that certain  '''Dependencies''' musst be fulfilled during an installationThe dependency is visualized by a sign: '''<''' means '''lower''', '''>''' means '''higher''' and '''<nowiki>=</nowiki>''' means '''equal''', and refers to the file version}}
Abhängigkeiten können sein:
+
Dependencies can be:
  
* Das zusätzliche Dateien/Module benötigt werden.
+
* additional files / modules are required.
* Das Dateien/Module eine gewisse Revision/Version haben müssen.
+
* files / modules must have a specific revision / version.
  
 
[[Kategorie:Anleitungen]]
 
[[Kategorie:Anleitungen]]

Version vom 22. September 2013, 09:57 Uhr

Deutsch.png - in Deutsch English.png - in English

Basics

Ambox notice.png The dreambox has a package management system (*.ipk), which monitors the installation, deinstallation and updating of drivers, plugins etc. When updating the Secondstage Loader or drivers, it's sufficient to install the most recent version. Afterwards reboot the box.

Drivers have the following naming convention: dreambox_dvb_modules_xxxxxxxx

Ambox attention.png If you flash a Secondstage Loader as *.nfi, the package management system of Enigma2 will not be aware of the change, and the dependencies will be wrong

Where do I find the Secondstage Loader, drivers, plugins (as *.ipk) etc..

First of all: the official feed from Dream Multimedia.

Secondstage Loader can also be found here in the board (but can not be used for the installation over the file manager) , same for the drivers

And finally, an overview of plugins in the board

Installation

Ambox notice.png For the installation the /tmp directory can be used, after a reboot of the box all files in the directory are deleted
  1. Connect via FTP with the dreambox
  2. Copy the files in /tmp
  3. Install the file(s) over the file browser, by selecting the file and starting the installation over the green button.
Ambox notice.png It's also possible to install the files via Telnet. Use the command cd /tmp to access the directory, and with install ipkg ********.ipk the installation is started

Dependencies

Ambox notice.png As mentioned before, the dreambox has a package management system. Therefor it might occur that certain Dependencies musst be fulfilled during an installation. The dependency is visualized by a sign: < means lower, > means higher and = means equal, and refers to the file version

Dependencies can be:

  • additional files / modules are required.
  • files / modules must have a specific revision / version.