GP3 CAM manager (en)

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Deutsch.png - in Deutsch English.png - in English

Camd settings

GP3-CamEinstellungen.png
The cursor is on the entry:

Select Camd - Here you can select one of the installed Cams (with left/right).
If no Camd is installed yet, you will see: "Common Interface".
It's only possible to activate different Cams (emus) if they were installed before.

With the "green button" the selection is saved and the selected softcam is started.

With the "red button" the selected Cam is restarted.

In GP3 the CAMs keep running after an Enigma2 restart!

GP3-CamEinstellungenInfobar.png

Here you can select the CAM data, which will be displayed in the infobar.