Image update - Dreambox 7025: Unterschied zwischen den Versionen

Aktuelle Version vom 9. Juni 2013, 16:53 Uhr

Here are the complete illustrated instructions in German

You need:

a LAN-Cable
a recent image
if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address
a browser (IE, Opera, Firefox)

Instructions can be found here.

You need:

Further instructions and the software can be found here.

As DCC currently doesn't support Enigma2 this method cannot be used on the DM 7025.

Installation on USB stick currently not supported.

Installation on CF-cards is possible.

@@ Zeile 9: / Zeile 9: @@
 === Installation via Web Browser ===
 You need:
-* a LAN-Cable (If you don't have a switch or a router then you can use a cross-over-cable to directly connect your PC to your dreambox).
+* a LAN-Cable
-* a recent Gemini-image (from the Database)
+* a recent [[ Image installation (en)#Where can I find an Image?|image]]
 * if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address
 * a browser (IE, Opera, Firefox)
@@ Zeile 18: / Zeile 18: @@
 You need:
 * a serial cable RS 232
-* a recent Gemini-Image (from the Database)
+* a recent [[ Image installation (en)#Where can I find an Image?|image]]
 * the update software DreamUp (NOT DreamUpLan!)
 Further instructions and the software can be found [http://www.dream-multimedia-tv.de/en/dm-7025-flashing-new-firmware-image-browser here.]
@@ Zeile 30: / Zeile 30: @@
 === CF-Karte ===
-Installation on CF-cards is possible. Further instructions (german version) can be found  [http://www.i-have-a-dreambox.com/wbb2/thread.php?threadid=46632 here.]
+Installation on CF-cards is possible.
 [[Kategorie:Instructions (en)]]