Differences from DM800 HD PVR to Cloneboxes: Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Zeile 76: Zeile 76:
  
  
This is a Power Supply Unit of a Clone 800
+
This is a Power Supply Unit from Clone Boxes
  
 
[[Bild:Netzteil Clone.jpg]]    [[Bild:Netzteil Clone1.jpg]]
 
[[Bild:Netzteil Clone.jpg]]    [[Bild:Netzteil Clone1.jpg]]

Version vom 2. November 2009, 20:32 Uhr

Deutsch.png - in deutsch English.png - in english

Dreambox 800 vs. Klonebox 800

Ambox attention.png Here you will find details of the differences between a CloneBox 800 an the original DreamBox 800. The differences can deviate depending upon the CloneBox manufacturer or/and DMM can also change some components or something. If you have doubts whether your DreamBox is an original of DMM or if you surely have a CloneBox, then contact:

Dream Multimedia Mail : plagiate@dream-multimedia-tv.de

Thanx to koepi for posting the pictures in the forum. click here

Thanx to ATR for the pictures of the newer Clone Box.

Here a list of the known differences between an original DM800 DH PVR and a plagiarism.

Housing screws

The Housing screws of the DM 800 are for tin metal sheet with a rough thread.

Schrauben DM.jpg

The Housing screws of the Clone 800 are with a fine thread.

Schrauben Clone.jpg

The screws at the back of the DM 800 differ from those of a clone 800. The screws for the eSATA connector are silver all other screws are black.


Schrauben DM 2.jpg

The screws at the back of the Clone 800 are silver up to the two housing screws.

Schrauben Clone 2.jpg


Back to Directory:


Surface of the Housing

The frame cover of DM 800 is painted with a structure.

Gehaese DM.jpg


The frame cover the clone 800 is painted brilliant.

Gehaese Clone.jpg


Back to Directory:


HDMI Kabel

The original HDMI cable of DM 800 is bound together with a rubber band.

HDMI Kabel DM.jpg


The HDMI cable Clone 800 is packed a bag.

HDMI Kabel Clone.jpg


Back to Directory:


Power Supply Unit

The original Power Supply Unit of a DM 800 should look in such a way.

Netzteil DM.jpg


This is a Power Supply Unit from Clone Boxes

Netzteil Clone.jpg Netzteil Clone1.jpg


Back to Directory:

Modem

The modem of a DM 800 is pasted with a not leading foil and on the back of the modem are components (IC, resistor …) to be seen.

Model DM.jpg

At the modem of a Clone 800 is missing the foil as well as the components.

Modem Clone.jpg


Back to Directory:


DreamBox Security SIM Card

The SC in the DM 800 is clearly to recognize marked and with a resin or an glue fixed.

SC Card DM1.jpg SC Card DM.jpg

Under the SC Card of a DM800 there are a lot of printed signs.

Dss.jpg


The SC of the Clone is blanc and not fixed. On new Clone versions are SC Card´s with Hologram.

SC Card Clone1.jpg SC Card Clone.jpg

Under the SC Card of a Clone there are a hand marked sign in this example an "A".

Dss clone.jpg


Back to Directory:

CPU Cooler

The DM 800 have no CPU Cooler.

CPU DM.jpg


The Cloneboxes have a CPU Cooler.

CPU Clone.jpg


Back to Directory:

Beschriftung Platine

On the DM800 Mainboard is a Sign (DM800 REV:) near the sata connector.

Bezeichnung PlatineDM 800.jpg

This Clone Mainboard are only signt with 800 REV: and the 14 pin connector is right of the sata connector.

Bezeichnung Platine Clone.jpg

Zurück zum Inhaltsverzeichnis:

Security Hologram

From July 2008 until June 2009, a Security Hologram was attached on the packing as well as on the rear side of the unit. Newer boxes again ship without this hologram.

Instead, in the future a plugin shall be available, calculating a verification number that can be entered and checked on Dream Multimedia's website.

Back to Directory:



Back to overview: Differences from Dreamboxen to Cloneboxes or Mainpage