Image update - Dreambox 7025: Unterschied zwischen den Versionen

Version vom 10. Januar 2010, 11:29 Uhr

Here are the complete illustrated instructions in German

You need:

- a LAN-Cable (If you don't have a switch or a router then you can use
a cross-over-cable to directly connect your PC to your dreambox)

- a recent Gemini-image (from the Database)

- if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address

- a browser (IE, Opera, Firefox)

Instructions can be found here.

You need:

- a serial cable RS 232

- a recent Gemini-Image (from the Database)

- the update software DreamUp (NOT DreamUpLan!)

Further instructions and the software can be found here.

DCC currently doesn't support Enigma 2 and therefore this method cannot be used on the DM 7025.

Installation on USB stick currently not supported.

Installation on CF-cards is possible. Further instructions (german version) can be found here.

@@ Zeile 39: / Zeile 39: @@
 - a serial cable RS 232
-- a recent Gemini-Image (to be found at the Database)
+- a recent Gemini-Image (from the Database)
 - the update software DreamUp (NOT DreamUpLan!)