GP3 Sensor fields (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
 
(7 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 11: Zeile 11:
 
== Configure sensor fields ==
 
== Configure sensor fields ==
 
Open the {{Taste|Sensor fields}} in {{Blue|Blue Panel}} → {{Taste|Settings}}. Now you can assign the sensor fields depending on the used skin. The preview images of the different skins show the positions of the sensor fields in the infobar.
 
Open the {{Taste|Sensor fields}} in {{Blue|Blue Panel}} → {{Taste|Settings}}. Now you can assign the sensor fields depending on the used skin. The preview images of the different skins show the positions of the sensor fields in the infobar.
 +
 +
Finally save the settings with the {{green|green}} button.
  
 
== Informations in the infobar ==
 
== Informations in the infobar ==
Zeile 17: Zeile 19:
  
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
−
! width="160px" | '''Selection'''
+
! Selection
−
! width="580px" | '''Description'''
+
! width="500"|Description
−
! width="180px" | '''Required addon'''
+
! Example values
 +
! Required addon
 +
|-
 +
| switch off
 +
| Sensor field is deactivated in the infobar.
 +
|
 +
|
 
|-  
 
|-  
−
| width="70px" | '''switch off'''
+
| Temperature
−
| width="580px" | Sensor field is deactivated in the infobar.
+
| Displays the temperature of the Dreambox.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 +
| rowspan="17"| [[GP3 Installation (en)|geminiplugin]]
 
|-  
 
|-  
−
| width="70px" | '''Temperature'''
+
| Speed fan
−
| width="580px" | Displays the temperature of the Dreambox.
+
| Display RPM of the fan.  
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Speed fan'''
+
| Speed fan (/2)
−
| width="580px" | Display RPM of the fan.  
+
| Display RPM/2 of the fan.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Speed fan (/2)'''
+
| CPU Load
−
| width="580px" | Display RPM/2 of the fan.
+
| Displays the CPU Load of the Dreambox.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''CPU Load'''
+
| HDD Temperature
−
| width="580px" | Displays the CPU Load of the Dreambox.
+
| Display the Harddisk Temperature. This only happens when the disk ist active. When the disk is in standby the field displays '''stby'''.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''HDD Temperature'''
+
| HDD Temperature (always)
−
| width="580px" | Display the Harddisk Temperature. This only happens when the disk ist active. When the disk is in standby the field displays '''stby'''.
+
| Display the Harddisk Temperature. With this setting the disk will wake up to read the temperature.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''HDD Temperature (always)'''
+
| Video Size
−
| width="580px" | Display the Harddisk Temperature. With this setting the disk will wake up to read the temperature.
+
| Display the resolution of the TV channel or the film.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| 1920×1080
 
|-  
 
|-  
−
| width="70px" | '''Video Size'''
+
| Tuner (SNR in %)
−
| width="580px" | Display the resolution of the TV channel or the film.
+
| Display the [http://en.wikipedia.org/wiki/Signal-to-noise_ratio Signal-to-noise ratio] of the active tuner in [http://en.wikipedia.org/wiki/Percentage Percentage] (%).
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (SNR in %)'''
+
| Tuner (SNR in dB)
−
| width="580px" | Display the [http://en.wikipedia.org/wiki/Signal-to-noise_ratio Signal-to-noise ratio] of the active tuner in [http://en.wikipedia.org/wiki/Percentage Percentage] (%).
+
| Display the [http://en.wikipedia.org/wiki/Signal-to-noise_ratio Signal-to-noise ratio] of the active tuner in [http://en.wikipedia.org/wiki/Decibel dB].
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| SNR: 14.00 dB
 
|-  
 
|-  
−
| width="70px" | '''Tuner (SNR in dB)'''
+
| Tuner (BER)
−
| width="580px" | Display the [http://en.wikipedia.org/wiki/Signal-to-noise_ratio Signal-to-noise ratio] of the active tuner in [http://en.wikipedia.org/wiki/Decibel dB].
+
| Display thge [http://en.wikipedia.org/wiki/Bit_error_rate Ber] value of the active tuner.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (BER)'''
+
| Tuner (ACG)
−
| width="580px" | Display thge [http://en.wikipedia.org/wiki/Bit_error_rate Ber] value of the active tuner.
+
| Display the [http://en.wikipedia.org/wiki/Automatic_gain_control ACG] value of the active tuner.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (ACG)'''
+
| Tuner (Type)
−
| width="580px" | Display the [http://en.wikipedia.org/wiki/Automatic_gain_control ACG] value of the active tuner.
+
| Display the Tuner type - S / C / T.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| DVB-S
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Type)'''
+
| Tuner (Overview)
−
| width="580px" | Display the Tuner type - S / C / T
+
| Status of all tuners - Example for the DM8000: Tuner C active live channel, A active recording/streaming, B inactive, tuner slot D is empty.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| C (A*C)
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Overview)'''
+
| Tuner (Values)
−
| width="580px" | Status of all tuners - Example for the DM8000:  C (A*C) Tuner C active live channel, A active recording/streaming, B inactive, tuner slot D is empty.
+
| Display the transponder frequency (MHz) and polarisation plane (V/H).
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Values)'''
+
| Tuner (Values) + Sat name
−
| width="580px" | Display the transponder frequency (MHz) and polarisation plane (V/H).
+
| Display the transponder frequency (MHz) and polarisation plane (V/H) and the name of the satellite.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| 10847 MHz V 2/3 23000
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Values) + Sat name'''
+
| Tuner (Modulation)
−
| width="580px" | Display the transponder frequency (MHz) and polarisation plane (V/H) and the name of the satellite.
+
| Display the used modulation. (QPSK, 8PSK).
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Modulation)'''
+
| Tuner (Frequency)
−
| width="580px" | Display the used modulation. (QPSK, 8PSK).
+
| Display the actual frequency of the tuner.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Tuner (Frequency)'''
+
| Weather (actual)
−
| width="580px" | Display the actual frequency of the tuner.
+
| Display the actual temperature.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 +
| rowspan="3"| [[GP3 weather (en)|geminiweather]]
 
|-  
 
|-  
−
| width="70px" | '''Weather (actual)'''
+
| Weather (Today)
−
| width="580px" | Display the actual temperature.
+
| Display the min. / max. temperature of today.
−
| width="180px" | [[GP3 weather|geminiweather]]
+
|  
 
|-  
 
|-  
−
| width="70px" | '''Weather (Today)'''
+
| Weather (Tomorrow)
−
| width="580px" | Display the min. / max. temperature of today.
+
| Display the min. / max. temperature of tomorrow.
−
| width="180px" | [[GP3 weather|geminiweather]]
+
|  
 
|-  
 
|-  
−
| width="70px" | '''Weather (Tomorrow)'''
+
| Camd Name
−
| width="580px" | Display the min. / max. temperature of tomorrow.
+
| Display the name of the selected SC.
−
| width="180px" | [[GP3 weather|geminiweather]]
+
|
 +
| rowspan="5"| [[GP3 Installation (en)|geminiplugin]]
 
|-  
 
|-  
−
| width="70px" | '''Camd Name'''
+
| ECM (Info)
−
| width="580px" | Display the name of the selected SC.
+
| Display the ECM (Entitlement Control Message) informations. The ECM display must be set onto '''Sensor field''' in the menu [[GP3 CAM manager|CI-Sc]]. And the requiered informations need to be defined under [Edit].
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''ECM (Info)'''
+
| Crypt Info
−
| width="580px" | Display the ECM (Entitlement Control Message) informations. The ECM display must be set onto '''Sensor field''' in the menu [[GP3 CAM manager|CI-Sc]]. And the requiered informations need to be defined under [Edit].
+
| Displays the encryption information of the selected channel. The crypt info needs to be on '''Sensor field''' in the menu [[GP3 CAM manager|CI-Sc]].
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
| B I S V N CW ND CO DC BI
 
|-  
 
|-  
−
| width="70px" | '''Crypt Info'''
+
| Provider
−
| width="580px" | Displays the encryption information of the selected channel. The crypt info needs to be on '''Sensor field''' in the menu [[GP3 CAM manager|CI-Sc]].
+
| Displays the name of the provider of the selected channel.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''Provider'''
+
| Datum
−
| width="580px" | Displays the name of the provider of the selected channel.
+
| Zeigt das aktuelle Datum an.
−
| width="180px" | [[GP3 Installation|geminiplugin]]
+
|
 
|-  
 
|-  
−
| width="70px" | '''FlashExpander'''
+
| FlashExpander
−
| width="580px" | Displays the usage of Flashexpander.
+
| Displays the usage of Flashexpander.
−
| width="180px" | [[FlashExpander|flashexpander]]
+
| FE active
 +
| [[FlashExpander (en)|flashexpander]]
 
|}
 
|}
  

Aktuelle Version vom 1. März 2014, 21:31 Uhr

Deutsch.png - in Deutsch English.png - in English
Sensorfelder Einstellungen - Skin example: gp-skin-dmconcinnity-mod
Infobar

The Gemini 3 Plugin can display different informations (e.g. tuner overview, temp, etc.) in the infobar (TV and Video mode). Therefore you need a GP3 compatible skin with the corresponding settings for the sensor fields. Of course some informations require a specific Gemini addon. The next chapters explain the possibilities for the infobar with the corresponding addons.

Configure sensor fields

Open the Sensor fields in Blue Panel → Settings. Now you can assign the sensor fields depending on the used skin. The preview images of the different skins show the positions of the sensor fields in the infobar.

Finally save the settings with the green button.

Informations in the infobar

Here follows a list of the different informations which can be assigned to the sensor fields.

Selection Description Example values Required addon
switch off Sensor field is deactivated in the infobar.
Temperature Displays the temperature of the Dreambox. geminiplugin
Speed fan Display RPM of the fan.
Speed fan (/2) Display RPM/2 of the fan.
CPU Load Displays the CPU Load of the Dreambox.
HDD Temperature Display the Harddisk Temperature. This only happens when the disk ist active. When the disk is in standby the field displays stby.
HDD Temperature (always) Display the Harddisk Temperature. With this setting the disk will wake up to read the temperature.
Video Size Display the resolution of the TV channel or the film. 1920×1080
Tuner (SNR in %) Display the Signal-to-noise ratio of the active tuner in Percentage (%).
Tuner (SNR in dB) Display the Signal-to-noise ratio of the active tuner in dB. SNR: 14.00 dB
Tuner (BER) Display thge Ber value of the active tuner.
Tuner (ACG) Display the ACG value of the active tuner.
Tuner (Type) Display the Tuner type - S / C / T. DVB-S
Tuner (Overview) Status of all tuners - Example for the DM8000: Tuner C active live channel, A active recording/streaming, B inactive, tuner slot D is empty. C (A*C)
Tuner (Values) Display the transponder frequency (MHz) and polarisation plane (V/H).
Tuner (Values) + Sat name Display the transponder frequency (MHz) and polarisation plane (V/H) and the name of the satellite. 10847 MHz V 2/3 23000
Tuner (Modulation) Display the used modulation. (QPSK, 8PSK).
Tuner (Frequency) Display the actual frequency of the tuner.
Weather (actual) Display the actual temperature. geminiweather
Weather (Today) Display the min. / max. temperature of today.
Weather (Tomorrow) Display the min. / max. temperature of tomorrow.
Camd Name Display the name of the selected SC. geminiplugin
ECM (Info) Display the ECM (Entitlement Control Message) informations. The ECM display must be set onto Sensor field in the menu CI-Sc. And the requiered informations need to be defined under [Edit].
Crypt Info Displays the encryption information of the selected channel. The crypt info needs to be on Sensor field in the menu CI-Sc. B I S V N CW ND CO DC BI
Provider Displays the name of the provider of the selected channel.
Datum Zeigt das aktuelle Datum an.
FlashExpander Displays the usage of Flashexpander. FE active flashexpander

Skin examples of sensor field settings

Sensor fields - Skin example: gp-skin-dmm-hdr2
Sensor fields - Skin example: gp-skin-dmconcinnity-mod
Sensor fields - Skin example: gp-skin-zombi.hd1r3
Abgerufen von „http://wiki.blue-panel.com/index.php?title=GP3_Sensor_fields_(en)&oldid=16686“