Image update - Dreambox 7025: Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
 
Zeile 9: Zeile 9:
 
=== Installation via Web Browser ===
 
=== Installation via Web Browser ===
 
You need:
 
You need:
* a LAN-Cable (If you don't have a switch or a router then you can use a cross-over-cable to directly connect your PC to your dreambox).
+
* a LAN-Cable  
 
* a recent [[ Image installation (en)#Where can I find an Image?|image]]
 
* a recent [[ Image installation (en)#Where can I find an Image?|image]]
 
* if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address
 
* if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address

Aktuelle Version vom 9. Juni 2013, 17:53 Uhr

Deutsch.png - in Deutsch English.png - in English

Flash Installation

Here are the complete illustrated instructions in German

Installation via Web Browser

You need:

  • a LAN-Cable
  • a recent image
  • if you don't have a DHCP running, a serial cable and hypertermnal to set a IP Address
  • a browser (IE, Opera, Firefox)

Instructions can be found here.

Installation with DMM-Software (Serial cable)

You need:

  • a serial cable RS 232
  • a recent image
  • the update software DreamUp (NOT DreamUpLan!)

Further instructions and the software can be found here.

Installation with DCC (root.cramfs)

As DCC currently doesn't support Enigma2 this method cannot be used on the DM 7025.

Installation on external media

USB-Stick

Installation on USB stick currently not supported.

CF-Karte

Installation on CF-cards is possible.