GP3 Installation (en)

GP3 installation via FTP and Software manager

- in Deutsch

- in English

The Gemini Project 3 is installed in an OE image in only 2 steps.

1. Installation of the Gemini3 Wizard.
2. Execution of the Gemini3 Wizard.

Image recommendation

As basis for the GP3 installation we recommend an OE 2.0 based image from Dream Multimedia, Merlin or OoZoon. Flash instructions can be found in this article..

Requirements

Enigma2 Version for OE 2.0 For updating / installing the Gemini Plugin under OE 2.0 an Enigma2 version from ≥ 01.10.2013 is required. All currently available OE 2.0 Release Images are too old for a GP3.2 installation.

• No pre-installed soft-cams.
• No plugin that provide a quickbutton functionality.
• A working internet connection
• Image revision must be at least v3.2.1 (OE1.6) except DM7025(+).
• A flash memory expansion such as FlashExpander, Media-Boot, Dumbo, Flodder for boxes with small flash memory like DM500HD and DM800(se).
• When using an OoZoon Images, you need to install kernel-module-fuse.

Image preparation

• Set user mode on Expert in Menu → Settings → System → Customize.
• Enable multiple bouquets in Menu → Settings → System → Customize.
• Set DNS Server when using fixed network settings, or use DHCP.
• Set password for user root .
• Activate the Default-HD or an other HD skin before installing the GP3.2 Plugin (only OE 2.0). If you don't do so, the Blue Panel will not be displayed. Only HD skins are supported, or special SD/XD skins which were adapted for the GP3.2 Plugin.

Installation of Gemini Project 3

In iCVS images the Gemini3 Wizard is already preinstalled. You may skip the installation and go on with step GP3 plugin installation. On all other images you must first install the Gemini3 Wizard. The following descriptions shows different possibilities for the G3Wizard installation.

G3Wizard installation

Via Webinterface (preferred)

As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ.

http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard 

http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard 

http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part dreamboxip with the correct IP address of your dreambox an confirm with the ↵ Enter key.

http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

Restart Enigma2 after the installation or reboot the box.

Via FTP and Software manager

1. Download Gemini3 Wizard - Download of Gemini3 Wizard (g3wizard).
2. Copy Gemini3 Wizard via FTP into the root directory /.
3. Install Gemini3 Wizard with Menu → Settings → Software → Local Extensions... → internal Flash → Install → green button.
4. Restart Enigma2.

Via Telnet

Connect via Telnet to the box and enter following command.

opkg install http://download.blue-panel.com/gemini3/g3_wizard

Restart Enigma2 after the installation or reboot the box.

GP3 plugin installation

The installation is on all images the same. Open the Gemini3 Wizard with blue → Gemini3 Wizard and select Install Gemini plugin. The installation is without any Gemini extensions. Install them later via the Addons menu from Blue Panel. After the installation the box restart automatically.

The GP3 Blue Panel should now be accessible by pressing the blue button.

Video Tutorials for GP3 installation

Mr.Bunny provided some movies on YouTube showing the GP3 plugin installaion. The following one shows the GP3 installation on the iCVS image.

GP3 installation in iCVS