GP3 Installation (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
Zeile 1: Zeile 1:
−
[[Kategorie:Index]]
 
−
[[Kategorie:GP Plugin (en)]]
 
 
{|width="40%"
 
{|width="40%"
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
 
  |[[Bild:english.png]] - [[GP3 Installation (en)|in English]]
 
  |[[Bild:english.png]] - [[GP3 Installation (en)|in English]]
 
  |}  
 
  |}  
 +
= Installation =
  
−
=== Installation instructions ===
+
The [[Gemini Project 3 (en)|Gemini Project 3]] is installed in an OE image in only 2 steps.
−
 
 
−
The Gemini Plugin is installed in an CVS image in only 2 steps.
 
−
 
 
−
* Step 1: Manual installation of the Gemini Wizard. The Wizard is already included in our own iCVS images - so you may skip this step.
 
−
 
 
−
* Step 2: Execution of the GeminiWizard and installation of the Gemini Plugin
 
−
 
 
−
'''We recommend:'''
 
−
 
 
−
Original CVS Images from http://dreamboxupdate.com/  <-- OE1.6 or our iCVS image available via Database
 
  
 +
# Manual installation of the [[Gemini3 Wizard (en)|Gemini3 Wizard]]. The Wizard is already included in our own iCVS images (OE 1.6). So you may skip this step.
 +
# Execution of the Gemini3 Wizard.
  
−
'''Important:'''<br/>
 
−
No pre-installed soft-cams.
 
  
−
Other Plugins which provide a QuickButton functionality must NOT be installed.
+
= Image recommendation =
  
−
A '''working''' Internet connection. The wizard downloads all dependencies from the Internet.
+
An original image from http://dreamboxupdate.com based on OE 1.6 or [[OE 2.0 (en)|OE 2.0]]. Or take our iCVS image from the [http://www.i-have-a-dreambox.com/wbb2/database.php?sid= database] which is based on OE 1.6. Flash instructions can be found in this [[Installation of Gemini-Image|article]].
  
−
DM 7025 (+) users should use [[Dumbo_(en)|Dumbo]] because of the small amount of flash memory.
 
  
−
The following '"Kernel versions must be'" present in the used image.
 
  
−
* 7025 -> 2.6.12
+
= Requirements =
  
−
* 500hd -> 2.6.18
+
* No pre-installed soft-cams.
 +
* No plugin that provide a quickbutton functionality.
 +
* A working internet connection
 +
* Image revision must be at least 3.2.1 except DM7025(+).
 +
* A flash memory expansion such as [[FlashExpander (en)|FlashExpander]], [[Media-Boot (en)|Media-Boot]], [[Dumbo (en)|Dumbo]], etc. for boxes with small flash memory like DM7025(+).
  
−
* 800hd -> 2.6.18
 
  
−
* 800se -> 2.6.18
+
= Installation of GP3 =
  
−
* 8000 -> 2.6.18
+
In iCVS images the [[Gemini3 Wizard (en)|Gemini3 Wizard]] is already preinstalled. You may skip the installation and go on with step [[GP3 Installation (en)#GP3 plugin installation|GP3 plugin installation]]. On all other images you must first install the Gemini3 Wizard. The following descriptions shows different possibilities for the wizard installation.
  
−
* 7020hd -> 2.6.18
+
== Wizard installation ==
 +
=== Via Webinterface (preferred) ===
  
−
===Installation of GeminiWizard===
+
As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma 2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ.
  
−
With iCVS images you may skip the following steps (1-5) as the Gemini Wizard is already preinstalled.
+
[http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm8000/ipkg?command=install&package=http: //download.blue-panel.com/gemini3/g3_wizard]
  
−
IMPORTANT: Make sure your image of choice is clean and does NOT include preinstalled Softcams!
+
[http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
  
−
'''1. Download image and installation:'''
+
[http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
  
−
As mentioned before, we recommend to use DMM experimental or our in-house iCVS - images.
+
[http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
  
−
The installation takes place as usual either via web browser or DreamUP.
+
[http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
  
−
Find attached in more detail:
+
[http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
  
−
[[Image aufspielen - Dreambox 7025|Dreambox 7025]]
+
If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part '''dreamboxip''' with the correct IP address of your dreambox an confirm with the '''[Enter]''' key.
  
−
[[Image aufspielen - Dreambox 500HD|Dreambox 500HD]]
+
http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard
  
−
[[Image aufspielen - Dreambox 800|Dreambox 800(se)]]
+
Restart Enigma2 after the installation or reboot the box. The menu item Restart Enigma 2 is only available with enabled '''Expert''' mode setting.
  
−
[[Image aufspielen - Dreambox 8000|Dreambox 8000]]
 
  
−
[[Image aufspielen - Dreambox 7020 HD|Dreambox 7020HD]]
+
=== Via FTP and Software manager ===
  
 +
# Download Gemini3 Wizard - [http://download.blue-panel.com/gemini3/g3_wizard Download of Gemini3 Wizard (g3wizard)].
 +
# Copy Gemini3 Wizard via [[FTP]] into the root directory '''/'''.
 +
# Install Gemini3 Wizard with Menu ➤ Settings ➤ Software ➤ Local Extensions... ➤ Internal Flash ➤ Install ➤ [green] button.
 +
# Restart Enigma 2. This menu item is only available with enabled Expert mode. In case of advanced mode restart the box.
  
−
'''2. Download Gemini Wizard:'''
 
  
−
you can download the Gemini Wizard here: [http://download.blue-panel.com/gemini3/g3_wizard Download des Gemini3 Wizard (g3wizard)]
+
=== Via Telnet  ===
  
−
 
+
Connect via [[Telnet (en)|Telnet]] to the box and enter following command.
−
'''3. Copy Gemini Wizard on the Box:'''
 
−
 
 
−
We recommend to copy it to "/".
 
−
 
 
−
 
 
−
'''4. install Gemini Wizard with:'''
 
−
 
 
−
Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green
 
−
 
 
−
 
 
−
'''5. Gui restart (this item is only available in expert mode - in case of advanced mode you have to restart the Dreambox)'''
 
−
 
 
−
As an alternative, you may do steps 2,3 and 4 in one single step by using Telnet and running the following command:
 
  
 
  opkg install http://download.blue-panel.com/gemini3/g3_wizard
 
  opkg install http://download.blue-panel.com/gemini3/g3_wizard
  
−
===Installation of GeminiPlugin===
+
Restart Enigma 2 after the installation or reboot the box. This menu item '''Restart Enigma 2''' is only available with enabled '''Expert''' mode
  
−
From here the process is the same for all images.
 
  
−
Blue -> Gemini3Wizard -> Install-GeminiPlugin
+
== GP3 plugin installation ==
  
−
Installation is without Gemini Functional-Plugins: you are up to select and install the Plugins you need via Bluepanel Addon Server.
+
The installation is on all images the same. Open the Gemini3 Wizard with [blue] ➤ [Gemini3 Wizard] and select '''Install Gemini plugin'''. The installation is without any Gemini extensions. Install them later via the Addons menu from Blue Panel. After the installation the box restart automatically.
  
−
Your Dreambox will restart automatically when installation has finished.
+
The GP3 Blue Panel should now be accessible by pressing the '''[blue]''' button.
  
−
Gemini should be installed now.
 
  
−
Camds can be installed via blue-> Addons-> GeminiCamds.
+
= Gemini Plugin installation for dummies =
  
−
Rest should be selfexplicatory or maybe not. :)
+
Here you'll find another detailed HowTo especially for beginners: [[Gemini Plugin installation for dummies (en)]]
  
  
 +
= Video Tutorials for GP3 installation =
  
−
==== [[Gemini Plugin installation for Dummys]] ====
+
Mr.Bunny provided some movies on YouTube showing the GP3 plugin installaion. The following one shows the GP3 installation on the iCVS image.
−
 
 
−
Here you'll find another HowTo explained in more detail, especially for beginners: [[Gemini Plugin installation for Dummys]]
 
−
 
 
  
 
{|
 
{|
 
|<youtube v="DEfWhuq4dts" />  
 
|<youtube v="DEfWhuq4dts" />  
−
| This Video shows you how to install GP3 in iCVS Image.
 
 
|}
 
|}
  
  
−
 
+
[[Kategorie:GP Plugin (en)]]
−
 
 
−
'''Back to the overview:[[Gemini-Wiki:English Portal]] or [[Mainpage]]'''
 

Version vom 14. Oktober 2012, 15:50 Uhr

Deutsch.png - in Deutsch English.png - in English

Installation

The Gemini Project 3 is installed in an OE image in only 2 steps.

  1. Manual installation of the Gemini3 Wizard. The Wizard is already included in our own iCVS images (OE 1.6). So you may skip this step.
  2. Execution of the Gemini3 Wizard.


Image recommendation

An original image from http://dreamboxupdate.com based on OE 1.6 or OE 2.0. Or take our iCVS image from the database which is based on OE 1.6. Flash instructions can be found in this article.


Requirements

  • No pre-installed soft-cams.
  • No plugin that provide a quickbutton functionality.
  • A working internet connection
  • Image revision must be at least 3.2.1 except DM7025(+).
  • A flash memory expansion such as FlashExpander, Media-Boot, Dumbo, etc. for boxes with small flash memory like DM7025(+).


Installation of GP3

In iCVS images the Gemini3 Wizard is already preinstalled. You may skip the installation and go on with step GP3 plugin installation. On all other images you must first install the Gemini3 Wizard. The following descriptions shows different possibilities for the wizard installation.

Wizard installation

Via Webinterface (preferred)

As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma 2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ. 

http://dm8000/ipkg?command=install&package=http: //download.blue-panel.com/gemini3/g3_wizard 

http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard 

http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part dreamboxip with the correct IP address of your dreambox an confirm with the [Enter] key. 

http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard

Restart Enigma2 after the installation or reboot the box. The menu item Restart Enigma 2 is only available with enabled Expert mode setting.


Via FTP and Software manager

  1. Download Gemini3 Wizard - Download of Gemini3 Wizard (g3wizard).
  2. Copy Gemini3 Wizard via FTP into the root directory /.
  3. Install Gemini3 Wizard with Menu ➤ Settings ➤ Software ➤ Local Extensions... ➤ Internal Flash ➤ Install ➤ [green] button.
  4. Restart Enigma 2. This menu item is only available with enabled Expert mode. In case of advanced mode restart the box.


Via Telnet

Connect via Telnet to the box and enter following command. 

opkg install http://download.blue-panel.com/gemini3/g3_wizard

Restart Enigma 2 after the installation or reboot the box. This menu item Restart Enigma 2 is only available with enabled Expert mode


GP3 plugin installation

The installation is on all images the same. Open the Gemini3 Wizard with [blue] ➤ [Gemini3 Wizard] and select Install Gemini plugin. The installation is without any Gemini extensions. Install them later via the Addons menu from Blue Panel. After the installation the box restart automatically.

The GP3 Blue Panel should now be accessible by pressing the [blue] button.


Gemini Plugin installation for dummies

Here you'll find another detailed HowTo especially for beginners: Gemini Plugin installation for dummies (en)


Video Tutorials for GP3 installation

Mr.Bunny provided some movies on YouTube showing the GP3 plugin installaion. The following one shows the GP3 installation on the iCVS image.

EmbedVideo fehlt ein anzugebender Parameter.
Abgerufen von „http://wiki.blue-panel.com/index.php?title=GP3_Installation_(en)&oldid=11052“