GP3 Installation (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
 
(71 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
−
__NOEDITSECTION__ __TOC__
 
 
{|width="40%"
 
{|width="40%"
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
 
  |[[Bild:english.png]] - [[GP3 Installation (en)|in English]]
 
  |[[Bild:english.png]] - [[GP3 Installation (en)|in English]]
−
  |}{{#ev:youtube|w3EbgYhMSJo}}
+
  |}
 +
{{Achtung|Gemini3 Wizard installation required Mirror Feeds!. [https://www.i-have-a-dreambox.com/wbb5/forum/index.php?thread/202375-opendreambox-mirror-feed-dreamboxupdate-com-download-blue-panel-com-oe1-6-oe2-0/ (OE 2.0)] -  [https://www.i-have-a-dreambox.com/wbb5/forum/index.php?thread/202359-opendreambox-mirror-feed-dreamboxupdate-com-download-blue-panel-com-oe2-2-oe2-5/ (OE 2.2/OE 2.5)]}}
  
−
= Installation =
+
<div style="float:right;">{{#ev:youtube|AHs_6nPy7v4|450|right|GP3.3 Preview OE 2.5}}</div>
−
 
+
The [[Gemini Project 3 (en)|Gemini Project 3]] is installed in an OE image in a few steps.
−
The [[Gemini Project 3 (en)|Gemini Project 3]] is installed in an OE image in only 2 steps.
 
  
 
# Installation of the [[Gemini3 Wizard (en)|Gemini3 Wizard]].  
 
# Installation of the [[Gemini3 Wizard (en)|Gemini3 Wizard]].  
 
# Execution of the Gemini3 Wizard.
 
# Execution of the Gemini3 Wizard.
 +
# Ready ;-)
  
 +
== Image recommendation ==
 +
As basis for the GP3 installation we recommend an experimental [[OE 2.0 (en)|OE 2.0]], [[OE 2.2 (en)|OE 2.2]] or [[OE 2.5 (en)|OE 2.5]] image from [http://www.dreamboxupdate.com/ Dream Multimedia]. Flash instructions can be found in this [[Image installation (en)|article]].
  
−
= Image recommendation =
+
{{Hinweis|For [[Dreambox OS (en)|Dreambox OS]] based Boxes, images from DMM with GP3.3 included can be found in the [http://www.i-have-a-dreambox.com/wbb2/database.php? database] . Simply flash and update the image, ready.}}
−
 
 
−
An original image from http://dreamboxupdate.com based on OE 1.6 or [[OE 2.0 (en)|OE 2.0]]. Or take our iCVS image from the [http://www.i-have-a-dreambox.com/wbb2/database.php?sid= database] which is based on OE 1.6. Flash instructions can be found in this [[Installation of Gemini-Image|article]].
 
−
 
 
−
 
 
  
−
= Requirements =
+
{{Hinweis|If you want to build an image with GP3.3 for [[Dreambox OS (en)|Dreambox OS]] based boxes, take a look here:
 +
{{Hauptbeitrag (en)|Gemini_Image_Builder_Script_(en){{!}}Gemini Image Builder Script|}}}}
  
 +
== Requirements ==
 +
* Read the release info about the Gemini Project versions ([http://www.i-have-a-dreambox.com/wbb2/thread.php?threadid=172931 GP3], [http://www.i-have-a-dreambox.com/wbb2/board.php?boardid=349 GP3.2], [http://www.i-have-a-dreambox.com/wbb2/board.php?boardid=378 GP3.3]).
 +
* The mirror feed must be installed on its image.
 
* No pre-installed soft-cams.
 
* No pre-installed soft-cams.
 
* No plugin that provide a quickbutton functionality.
 
* No plugin that provide a quickbutton functionality.
 
* A working internet connection
 
* A working internet connection
−
* Image revision must be at least 3.2.1 except DM7025(+).
+
* A flash memory expansion such as [[FlashExpander (en)|FlashExpander]], [[MediaBoot Script (en)|Media-Boot]], [[Dumbo (en)|Dumbo]], [http://www.oozoon-board.de/wbb/index.php?page=Thread&threadID=973 Flodder] for boxes with small flash memory like DM500HD and DM800(se).
−
* A flash memory expansion such as [[FlashExpander (en)|FlashExpander]], [[Media-Boot (en)|Media-Boot]], [[Dumbo (en)|Dumbo]], etc. for boxes with small flash memory like DM7025(+).
+
* When using an OoZoon Images '''< OE2.2''', you first need to install <code>[http://www.i-have-a-dreambox.com/wbb2/thread.php?postid=1835755#post1835755 kernel-module-fuse]</code>.
−
 
+
* When using a Merlin Images, no changes are required.
−
= Image preparation =
 
−
 
 
−
* Set user mode on '''Expert''' in [Menu] ➤ [Settings] ➤ [System] ➤ [Adapt].
 
−
* Enable multiple bouquets in [Menu] ➤ [Settings] ➤ [System] ➤ [Adapt].
 
−
* Set [http://en.wikipedia.org/wiki/Domain_Name_System DNS] Server when using fixed network settings, or use [http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol DHCP].
 
−
 
 
  
−
= Installation of Gemini Project 3 =
+
== Image preparation ==
 +
* Set the primary [http://en.wikipedia.org/wiki/Domain_Name_System DNS] Server (e.g. IP of your router) when using fixed network settings, or use [http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol DHCP].
 +
* Set [[Change Password (en)|password]] for user <code>root</code> .
 +
* Activate the Default-HD or an other HD skin before installing the GP3.2 oder GP3.3 Plugin (only [[OE 2.0 (en)|OE 2.0]]/[[OE 2.2 (en)|OE 2.2]]/[[OE 2.5 (en)|OE 2.5]]).  If you don't do so, the Blue Panel will not be displayed.  Only HD skins are supported, or special SD/XD skins which were adapted for the GP3.2/GP3.3 Plugin.
  
−
In iCVS images the [[Gemini3 Wizard (en)|Gemini3 Wizard]] is already preinstalled. You may skip the installation and go on with step [[GP3 Installation (en)#GP3 plugin installation|GP3 plugin installation]]. On all other images you must first install the Gemini3 Wizard. The following descriptions shows different possibilities for the wizard installation.
+
== Installation of Gemini Project 3 ==
 +
The Gemini Project can be installed in 3 different ways. Please use the corresponding explanation, depending on the used image generation.
  
−
== Wizard installation ==
+
{{Achtung|There are '''two''' g3wizards, depending on the image generation. One for OE 1.6 / [[OE 2.0 (en)|OE 2.0]] and one for [[Dreambox OS (en)|Dreambox OS]] based images (stable or unstable). Please use the correct version. If not, the package management system will not install the wizard.}}
−
=== Via Webinterface (preferred) ===
 
  
−
As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ.  
+
=== G3Wizard installation for OE 1.6 or OE 2.0 ===
 +
==== Via Webinterface (preferred) ====
 +
As of webinterface version <code>20110310-r0</code> it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ.  
  
−
  [http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm8000/ipkg?command=install&package=http: //download.blue-panel.com/gemini3/g3_wizard]  
+
  [http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]  
  
−
  [http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]  
+
  [http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]  
  
−
  [http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
+
  [http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
  [http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
+
  [http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
  [http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
+
  [http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
  [http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard]
+
  [http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part '''dreamboxip''' with the correct IP address of your dreambox an confirm with the '''[Enter]''' key.
+
[http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
  http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard
+
  [http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
Restart Enigma2 after the installation or reboot the box. The menu item Restart Enigma2 is only available with enabled '''Expert''' mode setting.
+
If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part '''dreamboxip''' with the correct IP address of your dreambox an confirm with the {{Taste|↵ Enter}} key.
  
 +
http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php
  
−
=== Via FTP and Software manager ===
+
Restart Enigma2 after the installation or reboot the box.
  
−
# Download Gemini3 Wizard - [http://download.blue-panel.com/gemini3/g3_wizard Download of Gemini3 Wizard (g3wizard)].
+
==== Via FTP and Software manager ====
 +
# Download Gemini3 Wizard - [http://download.blue-panel.com/gemini3/g3_wizard.php Download of Gemini3 Wizard (g3wizard)].
 
# Copy Gemini3 Wizard via [[FTP]] into the root directory '''/'''.
 
# Copy Gemini3 Wizard via [[FTP]] into the root directory '''/'''.
−
# Install Gemini3 Wizard with Menu ➤ Settings ➤ Software ➤ Local Extensions... ➤ Internal Flash ➤ Install ➤ [green] button.
+
# Install Gemini3 Wizard with {{Taste|Menu}} → {{Taste|Settings}} → {{Taste|Software}} → {{Taste|Local Extensions...}} → {{Taste|internal Flash}} → {{Taste|Install}} → {{Green|green}} button.
−
# Restart Enigma2. This menu item is only available with enabled Expert mode. In case of advanced mode restart the box.
+
# Restart Enigma2.
−
 
 
−
 
 
−
=== Via Telnet  ===
 
  
 +
==== Via Telnet  ====
 
Connect via [[Telnet (en)|Telnet]] to the box and enter following command.
 
Connect via [[Telnet (en)|Telnet]] to the box and enter following command.
  
−
  opkg install http://download.blue-panel.com/gemini3/g3_wizard
+
  opkg install http://download.blue-panel.com/gemini3/g3_wizard.php
−
 
 
−
Restart Enigma2 after the installation or reboot the box. This menu item '''Restart Enigma2''' is only available with enabled '''Expert''' mode
 
−
 
 
−
 
 
−
== GP3 plugin installation ==
 
  
−
The installation is on all images the same. Open the Gemini3 Wizard with [blue] ➤ [Gemini3 Wizard] and select '''Install Gemini plugin'''. The installation is without any Gemini extensions. Install them later via the Addons menu from Blue Panel. After the installation the box restart automatically.
+
Restart Enigma2 after the installation or reboot the box.
  
−
The GP3 Blue Panel should now be accessible by pressing the '''[blue]''' button.
+
=== G3Wizard Installation for OE 2.2 or OE 2.5 ([[Dreambox_OS_(en)|Dreambox OS]]) ===
 +
==== Via Webadmin ====
 +
The downloaded [http://download.blue-panel.com/gemini33/g3_wizard.php wizard] can be installed with the [[WebAdmin (en)|WebAdmin]] Plugin. Restart [[Enigma2 (en)|Enigma2]] or reboot the box after the installation of the wizard.
  
 +
==== Via Telnet ====
 +
Connect via [[Telnet (en)|telnet]] with the dreambox and use following command.
 +
<syntaxhighlight>wget http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb && dpkg -i g3wizard_2.4-r0.0_all.deb</syntaxhighlight>
 +
or if ypu like complex commands, use this one ;)
 +
<syntaxhighlight>URL='http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb'; FILE=`mktemp`; wget "$URL" -qO $FILE && dpkg -i $FILE; rm $FILE</syntaxhighlight>
 +
Restart [[Enigma2 (en)|Enigma2]] or reboot the box after the installation of the wizard.
  
−
= Video Tutorials for GP3 installation =
+
=== GP3 plugin installation ===
 +
The installation is on all images the same. Open the Gemini3 Wizard with {{Blue|blue}} → {{Taste|Gemini3 Wizard}} and select {{Taste|Install Gemini plugin}}. The installation is without any Gemini extensions. You can nstall them later via the [[GP3 Addons (en)|Addons]] menu from Blue Panel. After the installation, the message {{Taste|Reboot Dreambox?}} is displayed. Confirm with {{Taste|yes}}.
  
−
Mr.Bunny provided some movies on YouTube showing the GP3 plugin installaion. The following one shows the GP3 installation on the iCVS image.
+
The GP3 Blue Panel should now be accessible by pressing the {{Blue|blue}} button.
−
{{#ev:youtube|DEfWhuq4dts}}
 
  
 +
== Video Tutorials for GP3 installation ==
 +
Mr.Bunny provided some movies on YouTube showing the GP3 plugin installation. The following one shows the GP3 installation on the iCVS image.<br />
 +
{{#ev:youtube|DEfWhuq4dts|340|left|GP3 installation in iCVS}}
  
−
[[Kategorie:GP3]]
+
[[Kategorie:GP3 (en)]]

Aktuelle Version vom 26. Januar 2024, 20:29 Uhr

Deutsch.png - in Deutsch English.png - in English
Ambox attention.png Gemini3 Wizard installation required Mirror Feeds!. (OE 2.0) - (OE 2.2/OE 2.5)
GP3.3 Preview OE 2.5

The Gemini Project 3 is installed in an OE image in a few steps.

  1. Installation of the Gemini3 Wizard.
  2. Execution of the Gemini3 Wizard.
  3. Ready ;-)

Image recommendation

As basis for the GP3 installation we recommend an experimental OE 2.0, OE 2.2 or OE 2.5 image from Dream Multimedia. Flash instructions can be found in this article.

Ambox notice.png For Dreambox OS based Boxes, images from DMM with GP3.3 included can be found in the database . Simply flash and update the image, ready.
Ambox notice.png If you want to build an image with GP3.3 for Dreambox OS based boxes, take a look here:
Hauptbeitrag.png see article: Gemini Image Builder Script

Requirements

  • Read the release info about the Gemini Project versions (GP3, GP3.2, GP3.3).
  • The mirror feed must be installed on its image.
  • No pre-installed soft-cams.
  • No plugin that provide a quickbutton functionality.
  • A working internet connection
  • A flash memory expansion such as FlashExpander, Media-Boot, Dumbo, Flodder for boxes with small flash memory like DM500HD and DM800(se).
  • When using an OoZoon Images < OE2.2, you first need to install kernel-module-fuse.
  • When using a Merlin Images, no changes are required.

Image preparation

  • Set the primary DNS Server (e.g. IP of your router) when using fixed network settings, or use DHCP.
  • Set password for user root .
  • Activate the Default-HD or an other HD skin before installing the GP3.2 oder GP3.3 Plugin (only OE 2.0/OE 2.2/OE 2.5). If you don't do so, the Blue Panel will not be displayed. Only HD skins are supported, or special SD/XD skins which were adapted for the GP3.2/GP3.3 Plugin.

Installation of Gemini Project 3

The Gemini Project can be installed in 3 different ways. Please use the corresponding explanation, depending on the used image generation.

Ambox attention.png There are two g3wizards, depending on the image generation. One for OE 1.6 / OE 2.0 and one for Dreambox OS based images (stable or unstable). Please use the correct version. If not, the package management system will not install the wizard.

G3Wizard installation for OE 1.6 or OE 2.0

Via Webinterface (preferred)

As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ. 

http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php 

http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php 

http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part dreamboxip with the correct IP address of your dreambox an confirm with the ↵ Enter key. 

http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

Restart Enigma2 after the installation or reboot the box.

Via FTP and Software manager

  1. Download Gemini3 Wizard - Download of Gemini3 Wizard (g3wizard).
  2. Copy Gemini3 Wizard via FTP into the root directory /.
  3. Install Gemini3 Wizard with Menu → Settings → Software → Local Extensions... → internal Flash → Install → green button.
  4. Restart Enigma2.

Via Telnet

Connect via Telnet to the box and enter following command. 

opkg install http://download.blue-panel.com/gemini3/g3_wizard.php

Restart Enigma2 after the installation or reboot the box.

G3Wizard Installation for OE 2.2 or OE 2.5 (Dreambox OS)

Via Webadmin

The downloaded wizard can be installed with the WebAdmin Plugin. Restart Enigma2 or reboot the box after the installation of the wizard.

Via Telnet

Connect via telnet with the dreambox and use following command. 

wget http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb && dpkg -i g3wizard_2.4-r0.0_all.deb

or if ypu like complex commands, use this one ;) 

URL='http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb'; FILE=`mktemp`; wget "$URL" -qO $FILE && dpkg -i $FILE; rm $FILE

Restart Enigma2 or reboot the box after the installation of the wizard.

GP3 plugin installation

The installation is on all images the same. Open the Gemini3 Wizard with blue → Gemini3 Wizard and select Install Gemini plugin. The installation is without any Gemini extensions. You can nstall them later via the Addons menu from Blue Panel. After the installation, the message Reboot Dreambox? is displayed. Confirm with yes.

The GP3 Blue Panel should now be accessible by pressing the blue button.

Video Tutorials for GP3 installation

Mr.Bunny provided some movies on YouTube showing the GP3 plugin installation. The following one shows the GP3 installation on the iCVS image.

GP3 installation in iCVS
Abgerufen von „http://wiki.blue-panel.com/index.php?title=GP3_Installation_(en)&oldid=19146“