GP3 Installation (en): Unterschied zwischen den Versionen

Aus Gemini-Wiki
Zur Navigation springen Zur Suche springen
K
 
(96 dazwischenliegende Versionen von 7 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
−
[[Kategorie:Index]]
 
−
[[Kategorie:FAQ and instructions]]
 
−
[[Kategorie:Basis knowledge]]
 
 
{|width="40%"
 
{|width="40%"
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
 
  |[[Bild:deutsch.png]] - [[GP3 Installation|in Deutsch]]
−
  |[[Bild:english.png]] - [[GP3 Installation engl|in English]]
+
  |[[Bild:english.png]] - [[GP3 Installation (en)|in English]]
−
  |}  
+
  |}
 +
{{Achtung|Gemini3 Wizard installation required Mirror Feeds!. [https://www.i-have-a-dreambox.com/wbb5/forum/index.php?thread/202375-opendreambox-mirror-feed-dreamboxupdate-com-download-blue-panel-com-oe1-6-oe2-0/ (OE 2.0)] -  [https://www.i-have-a-dreambox.com/wbb5/forum/index.php?thread/202359-opendreambox-mirror-feed-dreamboxupdate-com-download-blue-panel-com-oe2-2-oe2-5/ (OE 2.2/OE 2.5)]}}
  
−
=== Installation instructions ===
+
<div style="float:right;">{{#ev:youtube|AHs_6nPy7v4|450|right|GP3.3 Preview OE 2.5}}</div>
 +
The [[Gemini Project 3 (en)|Gemini Project 3]] is installed in an OE image in a few steps.
  
−
The Gemini Plugin is installed in an CVS image in only 2 steps.
+
# Installation of the [[Gemini3 Wizard (en)|Gemini3 Wizard]].  
 +
# Execution of the Gemini3 Wizard.
 +
# Ready ;-)
  
−
* Step 1: Manual installation of the Gemini Wizard. The Wizard is already included in our own iCVS images - so you may skip this step.
+
== Image recommendation ==
 +
As basis for the GP3 installation we recommend an experimental [[OE 2.0 (en)|OE 2.0]], [[OE 2.2 (en)|OE 2.2]] or [[OE 2.5 (en)|OE 2.5]] image from [http://www.dreamboxupdate.com/ Dream Multimedia]. Flash instructions can be found in this [[Image installation (en)|article]].
  
−
* Step 2: Execution of the GeminiWizard and installation of the Gemini Plugin
+
{{Hinweis|For [[Dreambox OS (en)|Dreambox OS]] based Boxes, images from DMM with GP3.3 included can be found in the [http://www.i-have-a-dreambox.com/wbb2/database.php? database] . Simply flash and update the image, ready.}}
  
−
'''We recommend:'''
+
{{Hinweis|If you want to build an image with GP3.3 for [[Dreambox OS (en)|Dreambox OS]] based boxes, take a look here:
 +
{{Hauptbeitrag (en)|Gemini_Image_Builder_Script_(en){{!}}Gemini Image Builder Script|}}}}
  
−
Original CVS Images from http://dreamboxupdate.com/ <-- OE1.6 or our iCVS image available via Database
+
== Requirements ==
 +
* Read the release info about the Gemini Project versions ([http://www.i-have-a-dreambox.com/wbb2/thread.php?threadid=172931 GP3], [http://www.i-have-a-dreambox.com/wbb2/board.php?boardid=349 GP3.2], [http://www.i-have-a-dreambox.com/wbb2/board.php?boardid=378 GP3.3]).
 +
* The mirror feed must be installed on its image.
 +
* No pre-installed soft-cams.
 +
* No plugin that provide a quickbutton functionality.
 +
* A working internet connection
 +
* A flash memory expansion such as [[FlashExpander (en)|FlashExpander]], [[MediaBoot Script (en)|Media-Boot]], [[Dumbo (en)|Dumbo]], [http://www.oozoon-board.de/wbb/index.php?page=Thread&threadID=973 Flodder] for boxes with small flash memory like DM500HD and DM800(se).
 +
* When using an OoZoon Images '''< OE2.2''', you first need to install <code>[http://www.i-have-a-dreambox.com/wbb2/thread.php?postid=1835755#post1835755 kernel-module-fuse]</code>.
 +
* When using a Merlin Images, no changes are required.
  
 +
== Image preparation ==
 +
* Set the primary [http://en.wikipedia.org/wiki/Domain_Name_System DNS] Server (e.g. IP of your router) when using fixed network settings, or use [http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol DHCP].
 +
* Set [[Change Password (en)|password]] for user <code>root</code> .
 +
* Activate the Default-HD or an other HD skin before installing the GP3.2 oder GP3.3 Plugin (only [[OE 2.0 (en)|OE 2.0]]/[[OE 2.2 (en)|OE 2.2]]/[[OE 2.5 (en)|OE 2.5]]).  If you don't do so, the Blue Panel will not be displayed.  Only HD skins are supported, or special SD/XD skins which were adapted for the GP3.2/GP3.3 Plugin.
  
−
'''Important:'''
+
== Installation of Gemini Project 3 ==
 +
The Gemini Project can be installed in 3 different ways. Please use the corresponding explanation, depending on the used image generation.
  
−
Other Plugins which provide a QuickButton functionality must NOT be installed.
+
{{Achtung|There are '''two''' g3wizards, depending on the image generation. One for OE 1.6 / [[OE 2.0 (en)|OE 2.0]] and one for [[Dreambox OS (en)|Dreambox OS]] based images (stable or unstable). Please use the correct version. If not, the package management system will not install the wizard.}}
  
 +
=== G3Wizard installation for OE 1.6 or OE 2.0 ===
 +
==== Via Webinterface (preferred) ====
 +
As of webinterface version <code>20110310-r0</code> it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ.
  
 +
[http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
The following '"Kernel versions must be'" present in the used image.
+
[http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
* 7025 -> 2.6.12
+
[http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
* 500hd -> 2.6.18
+
[http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
* 800hd -> 2.6.18
+
[http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
* 800se -> 2.6.18
+
[http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
* 8000 -> 2.6.18
+
[http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
===Installation of GeminiWizard===
+
[http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php]
  
−
With iCVS images you may skip the following steps (1-5) as the Gemini Wizard is already preinstalled.
+
If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part '''dreamboxip''' with the correct IP address of your dreambox an confirm with the {{Taste|↵ Enter}} key.
  
−
IMPORTANT: Make sure your image of choice is clean and does NOT include preinstalled Softcams!
+
http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php
  
−
'''1. Download image and installation:'''
+
Restart Enigma2 after the installation or reboot the box.
  
−
As mentioned before, we recommend to use DMM experimental or our in-house iCVS - images.
+
==== Via FTP and Software manager ====
 +
# Download Gemini3 Wizard - [http://download.blue-panel.com/gemini3/g3_wizard.php Download of Gemini3 Wizard (g3wizard)].
 +
# Copy Gemini3 Wizard via [[FTP]] into the root directory '''/'''.
 +
# Install Gemini3 Wizard with {{Taste|Menu}} → {{Taste|Settings}} → {{Taste|Software}} → {{Taste|Local Extensions...}} → {{Taste|internal Flash}} → {{Taste|Install}} → {{Green|green}} button.
 +
# Restart Enigma2.
  
−
The installation takes place as usual either via web browser or DreamUP.
+
==== Via Telnet  ====
 +
Connect via [[Telnet (en)|Telnet]] to the box and enter following command.
  
−
Find attached in more detail:
+
opkg install http://download.blue-panel.com/gemini3/g3_wizard.php
  
−
[[Image aufspielen - Dreambox 7025|Dreambox 7025]]
+
Restart Enigma2 after the installation or reboot the box.
  
−
[[Image aufspielen - Dreambox 500HD|Dreambox 500HD]]
+
=== G3Wizard Installation for OE 2.2 or OE 2.5 ([[Dreambox_OS_(en)|Dreambox OS]]) ===
 +
==== Via Webadmin ====
 +
The downloaded [http://download.blue-panel.com/gemini33/g3_wizard.php wizard] can be installed with the [[WebAdmin (en)|WebAdmin]] Plugin. Restart [[Enigma2 (en)|Enigma2]] or reboot the box after the installation of the wizard.
  
−
[[Image aufspielen - Dreambox 800|Dreambox 800(se)]]
+
==== Via Telnet ====
 +
Connect via [[Telnet (en)|telnet]] with the dreambox and use following command.
 +
<syntaxhighlight>wget http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb && dpkg -i g3wizard_2.4-r0.0_all.deb</syntaxhighlight>
 +
or if ypu like complex commands, use this one ;)
 +
<syntaxhighlight>URL='http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb'; FILE=`mktemp`; wget "$URL" -qO $FILE && dpkg -i $FILE; rm $FILE</syntaxhighlight>
 +
Restart [[Enigma2 (en)|Enigma2]] or reboot the box after the installation of the wizard.
  
−
[[Image aufspielen - Dreambox 8000|Dreambox 8000]]
+
=== GP3 plugin installation ===
 +
The installation is on all images the same. Open the Gemini3 Wizard with {{Blue|blue}} → {{Taste|Gemini3 Wizard}} and select {{Taste|Install Gemini plugin}}. The installation is without any Gemini extensions. You can nstall them later via the [[GP3 Addons (en)|Addons]] menu from Blue Panel. After the installation, the message {{Taste|Reboot Dreambox?}} is displayed. Confirm with {{Taste|yes}}.
  
 +
The GP3 Blue Panel should now be accessible by pressing the {{Blue|blue}} button.
  
−
'''2. Download Gemini Wizard:'''
+
== Video Tutorials for GP3 installation ==
 +
Mr.Bunny provided some movies on YouTube showing the GP3 plugin installation. The following one shows the GP3 installation on the iCVS image.<br />
 +
{{#ev:youtube|DEfWhuq4dts|340|left|GP3 installation in iCVS}}
  
−
you can download the Gemini Wizard here: [http://download.blue-panel.com/gemini3/g3wizard Download des Gemini3 Wizard (g3wizard)]
+
[[Kategorie:GP3 (en)]]
−
 
 
−
 
 
−
'''3. Copy Gemini Wizard on the Box:'''
 
−
 
 
−
We recommend to copy it to "/".
 
−
 
 
−
 
 
−
'''4. install Gemini Wizard with:'''
 
−
 
 
−
Menu -> Settings -> Software -> local Extensions... -> InternalFlash -> Install -> green
 
−
 
 
−
 
 
−
'''5. Gui restart (this item is only available in expert mode - in case of advanced mode you have to restart the Dreambox)'''
 
−
 
 
−
As an alternative, you may do steps 2,3 and 4 in one single step by using Telnet and running the following command:
 
−
 
 
−
opkg install http://download.blue-panel.com/gemini3/g3wizard
 
−
 
 
−
===Installation of GeminiPlugin===
 
−
 
 
−
From here the process is the same for all images.
 
−
 
 
−
Blue -> Gemini3Wizard -> Install-GeminiPlugin
 
−
 
 
−
 
 
−
There are 2 options
 
−
 
 
−
- Installation with all Gemini Plugins (you cannot remove unnecessary ones later)
 
−
 
 
−
- Installation without Gemini Plugins (Manual postinstallation through Blue-Panel Addon server is possible)
 
−
 
 
−
Your Dreambox will restart automatically when installation has finished.
 
−
 
 
−
Gemini should be installed now.
 
−
 
 
−
Camds can be installed via blue-> Addons-> GeminiCamds.
 
−
 
 
−
Rest should be selfexplicatory or maybe not. :)
 
−
 
 
−
 
 
−
 
 
−
==== [[Gemini Plugin installation for Dummys]] ====
 
−
 
 
−
Here you'll find another HowTo explained in more detail, especially for beginners: [[Gemini Plugin installation for Dummys]]
 
−
 
 
−
 
 
−
{|
 
−
|<youtube v="DEfWhuq4dts" />
 
−
| This Video shows you how to install GP3 in iCVS Image.
 
−
|}
 
−
 
 
−
 
 
−
 
 
−
 
 
−
'''Back to the overview:[[Gemini-Wiki:English Portal]] or [[Mainpage]]'''
 

Aktuelle Version vom 26. Januar 2024, 20:29 Uhr

Deutsch.png - in Deutsch English.png - in English
Ambox attention.png Gemini3 Wizard installation required Mirror Feeds!. (OE 2.0) - (OE 2.2/OE 2.5)
GP3.3 Preview OE 2.5

The Gemini Project 3 is installed in an OE image in a few steps.

  1. Installation of the Gemini3 Wizard.
  2. Execution of the Gemini3 Wizard.
  3. Ready ;-)

Image recommendation

As basis for the GP3 installation we recommend an experimental OE 2.0, OE 2.2 or OE 2.5 image from Dream Multimedia. Flash instructions can be found in this article.

Ambox notice.png For Dreambox OS based Boxes, images from DMM with GP3.3 included can be found in the database . Simply flash and update the image, ready.
Ambox notice.png If you want to build an image with GP3.3 for Dreambox OS based boxes, take a look here:
Hauptbeitrag.png see article: Gemini Image Builder Script

Requirements

  • Read the release info about the Gemini Project versions (GP3, GP3.2, GP3.3).
  • The mirror feed must be installed on its image.
  • No pre-installed soft-cams.
  • No plugin that provide a quickbutton functionality.
  • A working internet connection
  • A flash memory expansion such as FlashExpander, Media-Boot, Dumbo, Flodder for boxes with small flash memory like DM500HD and DM800(se).
  • When using an OoZoon Images < OE2.2, you first need to install kernel-module-fuse.
  • When using a Merlin Images, no changes are required.

Image preparation

  • Set the primary DNS Server (e.g. IP of your router) when using fixed network settings, or use DHCP.
  • Set password for user root .
  • Activate the Default-HD or an other HD skin before installing the GP3.2 oder GP3.3 Plugin (only OE 2.0/OE 2.2/OE 2.5). If you don't do so, the Blue Panel will not be displayed. Only HD skins are supported, or special SD/XD skins which were adapted for the GP3.2/GP3.3 Plugin.

Installation of Gemini Project 3

The Gemini Project can be installed in 3 different ways. Please use the corresponding explanation, depending on the used image generation.

Ambox attention.png There are two g3wizards, depending on the image generation. One for OE 1.6 / OE 2.0 and one for Dreambox OS based images (stable or unstable). Please use the correct version. If not, the package management system will not install the wizard.

G3Wizard installation for OE 1.6 or OE 2.0

Via Webinterface (preferred)

As of webinterface version 20110310-r0 it is possible to install ipk files directly via the Enigma2 webinterface. The following links should work with most home networks. Simply click the link from your dreambox typ. 

http://dm8000/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php 

http://dm7020hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php 

http://dm800sev2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm800se/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm800/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm500hdv2/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm500hd/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

http://dm7025/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

If you have problems with the links above or no samba server is installed, copy the following link in your web browser. Now adapt the part dreamboxip with the correct IP address of your dreambox an confirm with the ↵ Enter key. 

http://dreamboxip/ipkg?command=install&package=http://download.blue-panel.com/gemini3/g3_wizard.php

Restart Enigma2 after the installation or reboot the box.

Via FTP and Software manager

  1. Download Gemini3 Wizard - Download of Gemini3 Wizard (g3wizard).
  2. Copy Gemini3 Wizard via FTP into the root directory /.
  3. Install Gemini3 Wizard with Menu → Settings → Software → Local Extensions... → internal Flash → Install → green button.
  4. Restart Enigma2.

Via Telnet

Connect via Telnet to the box and enter following command. 

opkg install http://download.blue-panel.com/gemini3/g3_wizard.php

Restart Enigma2 after the installation or reboot the box.

G3Wizard Installation for OE 2.2 or OE 2.5 (Dreambox OS)

Via Webadmin

The downloaded wizard can be installed with the WebAdmin Plugin. Restart Enigma2 or reboot the box after the installation of the wizard.

Via Telnet

Connect via telnet with the dreambox and use following command. 

wget http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb && dpkg -i g3wizard_2.4-r0.0_all.deb

or if ypu like complex commands, use this one ;) 

URL='http://download.blue-panel.com/gemini33/g3wizard_2.4-r0.0_all.deb'; FILE=`mktemp`; wget "$URL" -qO $FILE && dpkg -i $FILE; rm $FILE

Restart Enigma2 or reboot the box after the installation of the wizard.

GP3 plugin installation

The installation is on all images the same. Open the Gemini3 Wizard with blue → Gemini3 Wizard and select Install Gemini plugin. The installation is without any Gemini extensions. You can nstall them later via the Addons menu from Blue Panel. After the installation, the message Reboot Dreambox? is displayed. Confirm with yes.

The GP3 Blue Panel should now be accessible by pressing the blue button.

Video Tutorials for GP3 installation

Mr.Bunny provided some movies on YouTube showing the GP3 plugin installation. The following one shows the GP3 installation on the iCVS image.

GP3 installation in iCVS
Abgerufen von „http://wiki.blue-panel.com/index.php?title=GP3_Installation_(en)&oldid=19146“